Fast, Reliable Heating & Furnace Across Burbank
Most furnace repairs in Burbank run $175–$825 and can be completed same-day when parts are available. Furnace replacement typically costs $4,130–$8,850 depending on whether we’re retrofitting a 1950s floor furnace or swapping a modern central unit. Call Meridian Heating & Air Los Angeles at (877) 454-5066 for a free estimate.
We’ve been driving to Burbank from our Los Angeles base for nearly two decades. We know the difference between a Magnolia Park bungalow with original wall heaters and a hillside home off Glenoaks with a newer forced-air system. Burbank’s post-war housing stock presents specific challenges that out-of-town crews miss: cracked heat exchangers in floor furnaces, undersized flex duct baking in 155°F attics, and the unique permit workflow through Burbank Water and Power instead of SCE. Anthony Moreno still leads every installation personally, and that matters when we’re crawling through a tight Rancho Equestrian attic to size a new furnace properly.
Why Meridian Heating & Air Los Angeles Is Burbank’s Preferred Heating & Furnace Company
Our Heating & Furnace team has built a reputation in Burbank one job at a time. 286 customers have left reviews averaging 4.8 stars, and many of those come from repeat calls in the 91505 and 91506 ZIP codes. We’re not a franchise sending whoever’s available; Anthony Moreno shows up on the job himself, whether it’s an emergency no-heat call on a cold January morning or a full system replacement in the Media District.
Response time matters in Burbank. When Santa Ana winds drop temperatures 30 degrees overnight and your furnace fails, you don’t want a dispatcher in another county figuring out which freeway to take. We’re local. We know Burbank Boulevard cuts east-west straight through the city, and we know the hillside streets off Verdugo can ice over before the valley floor. That local knowledge gets us to your door faster and gets your heat restored sooner.
The BWP factor separates us from contractors who work Burbank as an afterthought. Because Burbank Water and Power is a municipal utility completely separate from SCE, every permit, every rebate application, and every electrical service upgrade runs through BWP’s own system. We’ve seen out-of-town contractors submit SCE paperwork and leave homeowners waiting days for heat while the permit sits in limbo. We don’t make that mistake. We know BWP’s online portal, their inspection schedule, and their rebate tiers.
Our Heating & Furnace Services in Burbank
Furnace Repair
Burbank’s floor furnaces and wall heaters take a beating. Santa Ana wind events drive rapid temperature spikes that cycle equipment hard. We regularly see cracked heat exchangers, failed ignitors, and gas valve issues in homes from the 1940s through the 1960s. A typical furnace repair in Burbank runs $175–$825. We carry common parts for Goodman, Rheem, and York systems to minimize downtime, and we diagnose before we quote. No guessing.
Furnace Replacement
Replacing a furnace in Burbank often means more than swapping boxes. Many homes in the 91505 and 91506 ZIP codes still run original floor furnaces or wall heaters with no central ductwork. Retrofitting these houses requires careful load calculation, creative duct routing through low-pitch attics, and proper sealing against attic temperatures that hit 155–160°F in July. Anthony Moreno personally measures every job. We install Carrier, Trane, Lennox, and other major brands, and we handle the BWP permit start to finish. Full replacements typically range $4,130–$8,850.
Furnace Tune-Up
A furnace tune-up in Burbank costs $80–$200 and should happen annually, ideally before the first Santa Ana event of fall. We check heat exchangers for cracks, test gas pressure and combustion, inspect blower motors and belts, and verify thermostat calibration. In Burbank’s climate, we pay special attention to duct seals degraded by attic heat and to combustion chambers stressed by thermal cycling. Catching a cracked heat exchanger early prevents carbon monoxide risk and avoids an emergency no-heat call.
Heat Exchanger Inspection & Replacement
The heat exchanger is the critical safety component in any gas furnace. In Burbank, we see accelerated failure from two local factors: Santa Ana-driven thermal cycling that expands and contracts metal repeatedly, and original floor furnaces in 1950s tract homes that were never designed for decades of hard use. A cracked heat exchanger can leak carbon monoxide into living spaces. Our heat exchanger inspection runs $150–$700 depending on accessibility and whether combustion analysis is needed. If replacement is required, we’ll show you the crack, explain your options, and never pressure a full system replacement when a targeted repair makes sense.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We work on your brand. Our experience spans nine major manufacturers: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Burbank customers, this means we don’t force a one-size-fits-all solution. We stock common Goodman and Rheem parts locally for faster turnaround on repairs, and we’re factory-trained on York and Daikin systems for complex diagnostics. Whether your Burbank home runs a 30-year-old floor furnace or a new high-efficiency modulating unit, we’ve likely serviced the exact model before. That breadth matters when you’re choosing between repair and replacement, or when you’re trying to match a new furnace to existing ductwork designed for a specific airflow pattern.
Common Heating & Furnace Problems We See in Burbank Homes
- Cracked heat exchangers in floor furnaces. The original Rheem, Carrier, and Lennox floor furnaces installed in Burbank’s 1950s tract homes weren’t built for decades of Santa Ana thermal cycling. Metal expands and contracts violently during rapid temperature swings. We inspect with cameras and combustion analyzers, and we replace with sealed-combustion units when repair isn’t safe.
- Failed duct seals bleeding heat into 155°F attics. Original flex duct in Burbank’s post-war homes degrades quickly when attic temperatures spike. Conditioned air escapes before it reaches rooms, forcing furnaces to overwork. We perform duct blaster testing and seal with mastic rated for extreme attic conditions.
- Short-cycling during Santa Ana wind events. Rapid temperature drops trick older thermostats into false readings, or cause high-limit switches to trip when restricted airflow meets sudden demand. We recalibrate controls and verify return air paths aren’t blocked by decades of accumulated dust in original wall cavities.
- BWP permit delays from out-of-town contractors. We’ve been called to Burbank homes where the previous contractor submitted SCE paperwork for a Burbank job. The permit sat unprocessed for days while the family had no heat. We know BWP’s system and submit correctly the first time.
Pricing for Heating & Furnace in Burbank, CA
Honest pricing starts with honest ranges. Here’s what heating and furnace service costs in Burbank’s market:
| Service | Price Range |
|---|---|
| Furnace Repair | $175–$825 |
| Furnace Tune-Up | $80–$200 |
| Heat Exchanger Inspection | $150–$700 |
| Furnace Replacement | $4,130–$8,850 |
What moves you within these ranges? Accessibility matters. A floor furnace in a 1952 Rancho Equestrian home with a tight crawl space takes longer than a closet-mounted unit in a newer construction near the Burbank Town Center. Duct condition matters too. If we’re replacing a furnace and the original flex duct is disintegrating, remediation adds cost but prevents callbacks. We quote everything upfront. Call (877) 454-5066 for a free, no-obligation estimate at your Burbank home.
We Also Serve Cities Near Burbank
Our service radius covers Universal City, North Hollywood, Glendale, and Studio City. Each has different utility workflows, housing stock, and permit requirements. Glendale runs its own municipal utility like Burbank. North Hollywood falls under SCE. We know the difference and adjust accordingly. If you’re on the border between Burbank and one of these neighboring cities, we’ll confirm your utility and permit path when you call.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Heating & Furnace in Burbank
Your floor furnace was standard construction in Burbank’s post-WWII tract homes, which were built for mild Southern California winters and rarely included central air or ductwork. Yes, we replace floor furnaces with central heating regularly. The retrofit requires routing new ductwork through your attic or crawl space, sizing a furnace for your actual heat load, and pulling a BWP permit. We recently replaced a failing floor furnace in a 1952 tract home on Lake Street in the Rancho Equestrian neighborhood. The original Rheem unit had a cracked heat exchanger from years of Santa Ana-driven thermal cycling. We installed a new Carrier high-efficiency furnace with a sealed combustion chamber, ran a BWP permit through their online portal, and advised the homeowner on a $300 rebate from BWP’s energy efficiency program. Call (877) 454-5066 to discuss your specific layout.
Yes. Burbank Water and Power handles all electrical and mechanical permits for Burbank properties, completely separate from SCE’s system. Your contractor must submit through BWP’s online portal and schedule BWP inspections. Contractors unfamiliar with this workflow cause delays. We handle BWP permits routinely and know their inspection timeline. Call (877) 454-5066 and we’ll walk you through the process for your specific project.
No, short-cycling is never normal and indicates a problem that needs attention. In Burbank, Santa Ana winds cause rapid temperature drops that stress furnaces already struggling with restricted airflow from original undersized ductwork or dirty filters. The high-limit switch trips to prevent overheating, then resets, then trips again. Left unaddressed, this wears out components and can crack a heat exchanger. We diagnose the root cause, whether it’s airflow restriction, thermostat placement, or an oversized furnace matched to degraded ductwork. Call (877) 454-5066 for same-day diagnosis.
Once yearly, ideally in September or October before Santa Ana season begins. Burbank’s combination of high attic temperatures in summer and rapid thermal cycling in fall stresses seals, motors, and heat exchangers more than coastal climates. Annual tune-ups catch cracked heat exchangers, failing ignitors, and gas pressure drift before they become safety hazards or emergency calls. Our tune-up is $80–$200. Call (877) 454-5066 to schedule before the first cold snap.
Yes, BWP offers energy efficiency rebates for qualifying high-efficiency furnace installations, typically ranging from $200–$400 depending on AFUE rating and whether you’re combining with other efficiency measures. We guide Burbank customers through the application and provide the required documentation. The rebate must be applied for after installation but within BWP’s program window. Call (877) 454-5066 and we’ll confirm current rebate tiers for your planned equipment.
Ready to get your Burbank home’s heating sorted? Whether you need a same-day repair on a failed floor furnace, a full system replacement with proper BWP permitting, or just an annual tune-up before the next Santa Ana event, Meridian Heating & Air Los Angeles delivers. Anthony Moreno leads every installation personally. We’ve got 19 years of hands-on HVAC experience, 286 reviews averaging 4.8 stars, and deep knowledge of Burbank’s specific housing stock, climate challenges, and utility workflows. Call (877) 454-5066 now for your free estimate.
Written by Anthony Moreno, Owner at Meridian Heating & Air Los Angeles, serving Burbank since 2006.