Heating & Furnace in Kentfield — Same-Day Service, Done Right the First Time

Fast, Reliable Heating & Furnace Across Kentfield

We get the call every winter when Kentfield valley temperatures drop below freezing and the baseboard heat in a Kent Woodlands home from 1962 finally quits. Furnace repair in Kentfield typically runs $175–$825, and most calls we handle in the 94914 zip code are same-day. You can reach us at (877) 454-5066 for a free estimate.

Call (877) 454-5066

Nearly two decades of hands-on HVAC experience means we’ve worked on the radiant-heat conversions, the hillside ductwork challenges, and the original gas furnaces that came with these mid-century builds. Anthony shows up on the job. That’s the difference between a founder who still installs and a dispatch center sending whoever’s available.

Why Meridian Heating & Air Los Angeles Is Kentfield’s Preferred Heating & Furnace Company

Our Heating & Furnace team knows the Ross Valley’s dual extremes firsthand. We’ve replaced heat exchangers in homes off Wolfe Grade where the morning frost lingers until ten, and we’ve diagnosed cracked ignitors in the same neighborhoods where summer heat pushes ninety-five. That local pattern knowledge saves diagnostic time.

286 customers and counting have left reviews averaging 4.8 stars. The feedback we hear most from Kentfield homeowners is simple: Anthony answered the phone, Anthony showed up, Anthony fixed it. No handoffs to subcontractors you’ve never met.

From our AC Repair & Installation in Kentfield to emergency calls, we structure our route scheduling to prioritize Marin County response. Kentfield sits roughly thirty-five miles north of our Los Angeles base, and we coordinate dedicated Northern California service runs to maintain reasonable arrival windows for urgent heating failures.

We also handle Heat Pump & Mini Split in Kentfield for homeowners converting from radiant or baseboard systems, plus Air Quality & Ventilation in Kentfield to address the wildfire smoke and pollen that gets trapped in these valley-floor homes.

Our Heating & Furnace Services in Kentfield

Furnace Repair

A dead furnace in Kentfield isn’t a minor inconvenience when valley cold pooling drops your bedroom to forty degrees. We repair gas valves, ignitors, blower motors, and control boards across the full range of equipment found in 94914 homes, from original 1970s units to recent high-efficiency replacements. Most furnace repair calls in Kentfield fall between $175–$825 depending on the failed component and accessibility. Hillside crawlspaces off Baron Lane or Kent Avenue can add labor time when the furnace sits in a tight corner of a raised foundation.

Furnace Replacement

When the heat exchanger cracks or repair costs approach half the value of a new system, replacement becomes the honest recommendation. Kentfield’s housing stock complicates this decision: many Kent Woodlands homes were built with radiant heat or wall furnaces and lack ductwork entirely. We’ve designed full duct systems from scratch in these properties, running flexible duct through attics and crawlspaces on steep lots where standard routing won’t work. A complete furnace replacement with new ductwork in Kentfield typically starts around $4,130 and can exceed $8,850 for complex hillside installations requiring custom fabrication.

Furnace Tune-Up

Annual maintenance runs $95–$235 and catches the problems that strand Kentfield homeowners on the coldest nights. We inspect heat exchangers for cracks, test gas pressure, clean burners, and verify venting integrity. In Kentfield’s Wildland-Urban Interface zone, we specifically check that combustion air intakes and exhaust terminations still carry their ember-resistant 1/16-inch mesh screens, required under Marin County fire-safe building standards. Standard louvered venting fails inspection here, and we’ve seen homeowners delayed at permit closeout because this detail was missed.

Heat Exchanger Inspection & Replacement

This is the safety-critical component we never let slide. A cracked heat exchanger can leak carbon monoxide into living spaces, and in Kentfield’s tightly built hillside homes with limited natural ventilation, that risk concentrates. We inspect with visual tools and combustion analyzers, and we replace heat exchangers or full furnaces when the integrity test fails. Given Kentfield’s temperature swings, heat exchangers here endure more thermal cycling stress than in coastal Marin where heating loads stay moderate.

Ignitor Replacement

Hot surface ignitors fail predictably after 3–5 years of use, and Kentfield’s heating season runs longer than many homeowners expect. When your furnace clicks but won’t fire, the ignitor is the first component we test. Replacement is usually straightforward and affordable, though some older Rheem and York units in the area use discontinued ignitor styles that require cross-referencing or minor bracket modification.

Gas Valve Repair

Erratic flame, delayed ignition, or a furnace that won’t stay lit often traces to the gas valve. We test manifold pressure against manufacturer specifications and replace valves when internal seals degrade. In Kentfield’s original 1950s–1970s homes, we’ve encountered outdated gas piping configurations that need updating before a new valve can be installed safely.

Trusted Brands We Service in Kentfield

We work on your brand, not ours. Anthony Moreno has factory training or field experience on nine major manufacturers: Carrier, Trane, Lennox in Kentfield, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Kentfield customers, this means we stock common parts for Rheem and York systems we’ve seen frequently in Marin County, and we can source Daikin and Bryant components with minimal delay. We’re not pushing one product line because we’re not tied to one supplier. The right solution for your Kentfield home depends on your existing infrastructure, your budget, and whether you’re staying with gas or transitioning to electric heat.

Common Heating & Furnace Problems We See in Kentfield Homes

• Cracked heat exchangers in original wall furnaces. Many Kentfield homes off College Avenue and Evergreen Drive still rely on 1960s-era floor or wall furnaces. The heat exchanger metal fatigues after fifty-plus years of expansion and contraction, and replacement parts are often obsolete. We evaluate whether repair or full replacement makes financial sense.
• Failed ignitors from extended heating seasons. Kentfield’s valley-floor cold pooling means furnaces run from November through March, sometimes into April. That extended duty cycle burns through ignitors faster than in milder microclimates, and we see a cluster of no-heat calls every February.
• Undersized equipment in converted radiant-heat homes. When homeowners add ducted forced air to a house originally designed for hydronic radiant, the furnace often gets sized by square footage alone without accounting for Kentfield’s genuine winter lows. The result: a system that runs constantly and still can’t hold seventy degrees on a thirty-degree night.
• Venting and combustion air issues in WUI zones. Kent Woodlands’ wildland-urban interface designation means every vent penetration needs ember-resistant screening. We’ve been called after other contractors’ installations failed Marin County final inspection because standard vent terminations were used. We specify the correct hardware at design stage, not after the callback.

Pricing for Heating & Furnace in Kentfield, CA

We Also Serve Cities Near Kentfield

Our route coverage extends throughout central Marin County. We regularly service Larkspur, San Anselmo, Corte Madera, and Fairfax on the same scheduling runs that bring us to Kentfield. If you’re in a neighboring town and found this page, the same pricing structure and Anthony’s direct involvement apply.

FAQs — Heating & Furnace in Kentfield