Fast, Reliable Heating & Furnace Across Torrance
Heating & Furnace repair in Torrance typically runs $150–$700 for repairs and $3,500–$7,500 for full replacement, with most service calls completed same-day. We’re Meridian Heating & Air Los Angeles, and we’ve been driving out to Torrance from our Los Angeles base for nearly two decades — long enough to know the difference between a 90504 slab-on-grade floor furnace and a 90505 ranch retrofit with salt-eaten coils. Anthony Moreno, our founder and lead installer, still shows up on the job himself. If your heater’s out this morning, call us at (877) 454-5066 for a free estimate.
Why Meridian Heating & Air Los Angeles Is Torrance’s Preferred Heating & Furnace Company
We’ve built our reputation in Torrance one service call at a time. Our Heating & Furnace team knows the local housing stock — the post-war ranches with original floor furnaces, the tight attics in 90503, the long driveways off Crenshaw and Hawthorne Boulevard where a tech who brings the wrong part wastes an hour, not ten minutes.
286 customers and counting have left us reviews, averaging 4.8 out of 5 stars. That number reflects nearly two decades of showing up, not a flash-in-the-pan marketing push. Torrance homeowners mention the same things: Anthony answered their questions directly, the crew didn’t leave a mess, and the fix held.
We’re familiar with the marine layer that rolls in off the Pacific, just three miles west of the 90505 ZIP code. That salt-laden air isn’t abstract to us — it’s why we carry corrosion-resistant parts and why we ask about your proximity to the coast before we quote a standard replacement.
Our response time to Torrance averages same-day or next-morning for non-emergency calls. For urgent situations — a cracked heat exchanger leaking carbon monoxide, a failed ignitor on a cold January night — we prioritize the call and route accordingly.
Our Heating & Furnace Services in Torrance
Furnace Repair
A furnace repair in Torrance usually costs $150–$700 depending on the part and accessibility. We see a lot of ignitor failures in west-side Torrance homes where salt air has corroded the burner assembly — the ignitor itself is a $30 part, but if the bracket and flame sensor are crusted with corrosion, the labor adds up. We work on your brand, whether it’s a 15-year-old Rheem in a 90504 tract home or a newer Daikin in a 90510 condo. Our trucks carry common ignitors, gas valves, and flame sensors for the nine major brands we service, so we’re not driving back to the warehouse while your house gets cold.
Furnace Replacement
Full furnace replacement in Torrance runs $3,500–$7,500, with the high end typically involving homes with no existing ductwork. This is where Torrance gets unique. The city’s dominant housing stock — post-WWII ranches built 1948–1972, concentrated in 90503, 90504, and 90505 — was originally heated by floor or wall furnaces with no forced-air system. Retrofitting these homes means running new ductwork through tight attics or slab-on-grade crawl spaces, sometimes cutting into interior walls that weren’t designed for it. We’ve done dozens of these. Anthony Moreno personally measures every run, checks static pressure, and specifies equipment that fits the actual heat loss — not a square-footage guess.
Furnace Tune-Up
A furnace tune-up in Torrance costs $80–$200 and should happen annually, especially within three miles of the coast. The salt air here isn’t kind to burners, heat exchangers, or outdoor condenser coils. During a tune-up, we pull and inspect the burners, test the flame sensor and ignitor, check heat exchanger integrity with a camera scope, and measure gas pressure. For Torrance homes near the water, we include a coil inspection and will recommend a corrosion coating if your unit doesn’t have one. It’s cheaper than a premature replacement.
Heat Exchanger Inspection & Replacement
Heat exchanger failure is the most serious furnace problem we encounter in Torrance. A cracked exchanger can leak carbon monoxide into your home, and we will red-tag a unit on the spot if we find one. Replacement costs vary widely — $800–$2,500 for the exchanger alone, though many Torrance homeowners choose full replacement if the furnace is over 12 years old, especially given the corrosion acceleration from coastal air. We use a borescope camera for every inspection, and we show you the footage. No guesswork, no pressure.
Ignitor Replacement
Ignitor replacement is one of our most common calls in Torrance, particularly after the first cold snap in November or December when furnaces fire up after months of disuse. The part runs $80–$250 installed, but we always check the broader burner assembly. In 90505 and 90503, we’ve seen ignitors fail prematurely because salt corrosion has compromised the grounding surface — replacing the ignitor without cleaning the mount means a callback in six months. We don’t do callbacks.
Gas Valve Repair
Gas valve issues show up as intermittent heating, failure to light, or a furnace that shuts down after a few minutes. Repair or replacement runs $200–$600. In Torrance’s older homes with original gas lines, we also check for proper pressure and valve compatibility — some 1950s systems have been modified over decades by multiple contractors, and the current valve may not match the original spec.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Torrance
We work on your brand — not ours. Anthony Moreno is factory-trained or field-experienced on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Torrance customers, this matters because we don’t try to sell you out of a perfectly good system just to hit a manufacturer quota. Our trucks stock common parts for Rheem, York, Daikin, and Bryant units, which are well-represented in Torrance’s 1960s–70s housing stock. If we need to order something, our Los Angeles warehouse usually has it next-day. No waiting two weeks for a proprietary board while your family bundles up.
Common Heating & Furnace Problems We See in Torrance Homes
- Salt-air corrosion of heat exchangers and burner assemblies. In Torrance’s west-side ZIP codes 90505 and 90503, our techs routinely pull 10–12 year old condenser units with coil fins corroded to lace — damage that would take another decade in Gardena, just 6 miles inland. The same marine layer deposits salt on furnace burner assemblies and heat exchanger surfaces, causing premature flame sensor and ignitor failures. Annual coil-wash agreements and factory corrosion coatings are standard for our Torrance customers, not an upgrade.
- Cracked floor furnaces on slab-on-grade homes in 90504. These post-war units sit in concrete pockets that collect ground moisture. After 60+ years, the heat exchanger metal fatigues and cracks, often leaking CO into the living space. Replacement requires a full ducted system retrofit, which is invasive but necessary for safety.
- Failed ignitors from corroded grounding surfaces. The ignitor itself is fine, but the mounting bracket in the burner assembly has lost conductivity from salt corrosion. A less experienced tech replaces the ignitor twice before figuring out the real problem. We check the assembly on the first call.
- Oversized garage and workshop heaters with improper venting. Torrance’s larger lots, especially in the 90503 and 90505 areas, often have detached workshops with propane or kerosene heaters. Coastal humidity corrodes fuel lines, and DIY venting installations frequently violate clearances. We’ve replaced corroded gas valves and rerouted venting on heavy-duty units that were installed by well-meaning owners who didn’t account for the salt air.
Pricing for Heating & Furnace in Torrance, CA
Here’s what heating service actually costs in Torrance. These ranges reflect our real invoices from the last 24 months — not national averages, not bait-and-switch estimates.
| Service | Typical Range in Torrance |
|---|---|
| Furnace Repair | $150–$700 |
| Furnace Replacement | $3,500–$7,500 |
| Furnace Tune-Up | $80–$200 |
| Heat Exchanger Replacement | $800–$2,500 |
| Ignitor Replacement | $80–$250 |
| Gas Valve Repair/Replacement | $200–$600 |
What moves you within these ranges? Accessibility — a floor furnace in a 90504 slab home takes longer to extract than an attic unit. Ductwork condition — retrofits into homes with no existing ducts start at the high end. Corrosion severity — if we need to replace multiple burner components, not just the ignitor, labor adds up. We quote upfront, in writing, before any work begins. Estimates are free. Call (877) 454-5066 to schedule.
We Also Serve Cities Near Torrance
Our service radius covers Lomita to the east, West Carson to the north, Rolling Hills Estates to the west, and Manhattan Beach up the coast. Each has its own HVAC quirks — Lomita’s older commercial buildings, Rolling Hills’ estate homes with multiple zones, Manhattan Beach’s even more aggressive salt-air corrosion. If you’re in one of these areas and found this page, the same owner-led service applies. Call and we’ll route accordingly.
Serving Torrance, CA — Our Local Coverage Area
We’re based in the Torrance area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Heating & Furnace in Torrance
Salt-air corrosion on the burner assembly grounding surface causes most premature ignitor failures in Torrance’s west-side ZIP codes. The ignitor itself is often fine; the metal it mounts to has lost conductivity. We clean or replace the bracket, not just the part, which solves the repeat failure. If your ignitor has failed twice in two years, call (877) 454-5066 — we’ll inspect the full assembly.
A full furnace replacement with new ductwork in a ductless Torrance ranch typically runs $5,500–$7,500, at the high end of our standard range. The home’s slab-on-grade construction, tight attic, and interior wall routing all add labor. We’ve done many of these in 90503, 90504, and 90505. Anthony Moreno measures every job personally to avoid surprises. Call for a free in-home estimate.
You need corrosion-resistant specifications, not a special model. We specify factory-coated heat exchangers and burner assemblies as baseline for homes within three miles of the Pacific, and we recommend annual coil-wash maintenance agreements. These aren’t upsells — they’re standard practice for any contractor who actually works the coast. Ask us about coating options when you call.
Yes. We regularly service detached workshop heaters on larger Torrance lots, especially in 90503 and 90505. Last winter, we serviced a 1955 ranch home on a half-acre lot off Crenshaw Boulevard in 90503. The homeowner’s old floor furnace had given out, and with no existing ductwork, we retrofitted a full Lennox modulating furnace system — the salt air meant we used a factory-coated heat exchanger as baseline. Our crew made the long service drive from the main road, and because the owner runs a woodshop in a detached garage, we also serviced his heavy-duty garage heater with a new gas valve in the same trip. If you’ve got multiple heating systems on your property, we’ll handle them in one visit. Call (877) 454-5066 to schedule.
Cracked floor furnace heat exchangers in 90504 slab-on-grade homes, followed by salt-corroded burner assemblies in west-side 90505 and 90503. Both are age-related but accelerated by Torrance’s specific conditions — ground moisture in the first case, marine-layer salt in the second. Either can leak carbon monoxide and requires immediate professional inspection. If your home was built 1948–1972 and still has original heating equipment, schedule an inspection this season. Call (877) 454-5066.
Written by Anthony Moreno, Owner at Meridian Heating & Air Los Angeles, serving Torrance and Los Angeles County since 2006.