Fast, Reliable Heat Pump & Mini Split Across Burbank
Heat pump and mini split installation in Burbank typically runs $3,500–$7,500 for a full system, with repairs starting around $150–$650 and same-day service available for most calls. We serve homeowners from the Magnolia Park bungalows to the hillside streets above Glenoaks Boulevard, and we know the specific challenges Burbank’s post-war housing stock throws at HVAC equipment. Call (877) 454-5066 for a free estimate.
We’ve been driving our trucks into the San Fernando Valley for nearly two decades, and Burbank’s mix of 1950s tract homes, mid-century apartments, and newer builds near the Empire Center keeps us busy year-round. Anthony Moreno, our founder and lead installer, still shows up on the job — not to supervise, but to run the install or diagnose the system himself. That matters in Burbank, where a contractor who doesn’t understand Burbank Water and Power’s separate permit and rebate process can cost you thousands in missed incentives and delayed inspections.
Why Meridian Heating & Air Los Angeles Is Burbank’s Preferred Heat Pump & Mini Split Company
Our reputation in Burbank is built on showing up and doing the work right, not on marketing spend. We’ve got 286 verified reviews averaging 4.8 out of 5 stars from customers across Los Angeles County, and a healthy share of those come from Burbank homeowners who found us after bad experiences with franchise chains that sent whoever was available that day.
Anthony doesn’t delegate to a rotating crew of subcontractors. When you hire Meridian for a heat pump or mini split job in Burbank, Anthony’s the one sizing the system, running the lineset, and sealing the connections. That consistency matters when you’re threading refrigerant lines through a 1952 attic with 14 inches of clearance and original knob-and-tube wiring still live in the walls.
We know Burbank’s specific geography: the way summer heat pools in the valley floor while the Verdugo Mountains trap it in, the sudden Santa Ana spikes that push attic temperatures past 155°F, and which neighborhoods — from the Rancho area to the streets below the Starlight Bowl — have the oldest, most challenging retrofit conditions. We’re usually on-site in Burbank within an hour of your call, and we carry parts for Rheem, York, Daikin, and Bryant systems so we’re not ordering and waiting.
Our Heat Pump & Mini Split Services in Burbank
Heat Pump Installation
New heat pump installation in Burbank runs $3,500–$7,500 depending on system size, electrical upgrades needed, and whether we’re working with existing ductwork or starting from scratch. Most Burbank homes built between 1945 and 1965 have no central air at all — just original wall heaters or floor furnaces — so we’re often doing full retrofits. We pull permits through BWP’s separate process (not SCE), and we file for every rebate tier you qualify for. A properly sized heat pump replaces both your heating and cooling in one system, critical when Burbank’s January lows dip to 38°F and July highs hit 108°F.
Heat Pump Repair
Heat pump repair calls in Burbank spike during Santa Ana events, when rapid temperature swings and dust loads stress outdoor coils and electrical components. Common issues we see: failed capacitors from heat cycling, refrigerant leaks at flare connections vibrated loose by compressor operation, and short-cycling caused by original wall heaters still active and confusing thermostat logic. Repairs typically run $150–$650. We stock capacitors, contactors, and refrigerant for major brands, and Anthony carries a digital manifold set to verify charge levels against manufacturer specs, not guesswork.
Mini Split Install
Ductless mini split installation is our most requested service in Burbank’s older neighborhoods, and for good reason. No ducts to retrofit through a 150°F attic. No tearing out plaster walls. We mount the outdoor condenser on a pad or bracket, run insulated linesets through a 3-inch wall penetration, and place indoor heads where you actually need cooling — master bedroom, home office, back unit that never got central air. Single-zone systems start around $3,500; multi-zone setups with three or more heads run toward the higher end. We retrofitted a multi-zone mini split into a 1953 tract home on Naomi Avenue near Burbank High. The owners had a single window unit struggling to cool the back bedroom, and we ran linesets through the low-pitch attic, sealing every duct boot after a blaster test showed 40% leakage. Now they have zoned, efficient cooling even during July’s 108°F afternoons.
Mini Split Repair
Mini splits are reliable, but Burbank’s conditions punish them hard. Santa Ana winds drive dust and debris into outdoor condenser coils, causing high-pressure lockouts. Attic linesets in unconditioned spaces lose efficiency when ambient temperatures exceed 155°F. And the hard water from BWP’s municipal supply scales drain pans and clogs condensate pumps faster than in coastal areas. We clean coils with foaming cleaner and fin combs, verify refrigerant charge with electronic scales, and replace failed heads or outdoor units without replacing the entire system if the lineset’s still sound.
Multi-Zone System
For Burbank homes with additions, converted garages, or multiple levels with different sun exposures, a multi-zone mini split lets you condition each area independently. One outdoor unit drives two to five indoor heads, each with its own thermostat. You’re not cooling an empty guest room because the thermostat’s in the hallway. Energy costs drop, comfort improves, and you’re not fighting the uneven loads that plague Burbank’s original wall-heater layouts.
Ductless System
Pure ductless systems bypass every problem Burbank’s old housing stock creates for traditional central air. No flex duct degrading in 160°F attics. No sealed boots bleeding conditioned air into insulation. No trying to route 14-inch round duct through a truss system designed for nothing bigger than Romex. We size each head for the actual heat load of its zone, accounting for Burbank’s extreme summer design temperatures, and we stand behind the install because Anthony’s the one doing it.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We work on your brand, not ours. Anthony’s factory-trained or field-experienced on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard — nine major manufacturers, not one product line we’re trying to push. For Burbank customers, that means we stock capacitors, contactors, and control boards for the systems already in your home, and when you’re ready to replace, we recommend the right equipment for your specific house, not what’s moving fastest out of the warehouse. We keep common Rheem heat pump parts and Daikin mini split components on our trucks because those brands show up frequently in Burbank’s recent installs, and we don’t waste your time on parts runs.
Common Heat Pump & Mini Split Problems We See in Burbank Homes
- Undersized flex duct in attics exceeding 155°F causes mini split line sets to lose efficiency and connections to fail prematurely. When the attic’s hotter than the refrigerant inside the insulation, you’re fighting physics. We relocate linesets to conditioned space or upgrade insulation as part of any install.
- Original 1950s wall heaters left in place create uneven loads that confuse heat pump thermostats, leading to short cycling. The heat pump thinks it’s done because the wall heater’s blasting the hallway, while the back bedroom freezes. We disconnect and cap legacy heaters during heat pump conversion.
- Burbank’s hard Santa Ana winds drive dust and debris into outdoor mini split condensers, clogging coils and causing high-pressure lockouts. Annual coil cleaning is maintenance, not optional, in this environment.
- BWP’s separate utility structure means contractors from SCE territories file wrong permit applications and miss rebate deadlines. We’ve seen homeowners lose $1,500+ in BWP efficiency incentives because a Glendale-based contractor submitted SCE paperwork. We know BWP’s pull-permit procedures and rebate tiers because we work with them regularly.
Pricing for Heat Pump & Mini Split in Burbank, CA
Here’s what heat pump and mini split work actually costs in Burbank’s market. These ranges reflect real jobs we’ve completed from the Rancho neighborhood to the hills below the Starlight Bowl:
| Service | Typical Range in Burbank |
|---|---|
| Heat Pump / Mini Split Repair | $150 – $650 |
| Heat Pump / Mini Split Installation | $3,500 – $7,500 |
| Annual Tune-Up | $80 – $200 |
Installation costs vary with electrical service capacity (many Burbank homes still have 100-amp panels that need upgrading for heat pump loads), lineset length and routing difficulty, and whether you’re replacing existing equipment or starting fresh. Repair costs depend on parts availability — some 1990s heat pumps use discontinued refrigerants that require conversion or full replacement. We give upfront pricing before any work starts, and estimates are always free. Call (877) 454-5066 to schedule.
We Also Serve Cities Near Burbank
Our Heat Pump & Mini Split team covers the full San Fernando Valley and adjacent areas. We regularly install and repair systems in Universal City, North Hollywood, Glendale, and Studio City — though Burbank’s unique BWP utility structure and post-war housing stock give it specific requirements that contractors used to SCE territories sometimes miss.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Heat Pump & Mini Split in Burbank
Yes, BWP offers efficiency rebates for qualifying heat pump and mini split installations, but the application process is completely separate from SCE’s programs and requires BWP-specific paperwork. We handle the rebate filing as part of our installation service because we’ve seen too many Burbank homeowners miss out when out-of-area contractors submit the wrong utility’s forms. Call (877) 454-5066 and we’ll check your eligibility against current BWP tiers.
Absolutely, and a ductless mini split heat pump is often the best solution for Burbank’s post-war tract homes. We install the outdoor unit and run refrigerant linesets through walls or attics to indoor heads in each zone, with no ductwork required. Anthony has retrofitted dozens of these homes from Magnolia Park to the Rancho area, working around low-pitch attics and original plaster walls. Call for a free assessment of your specific layout.
Extreme attic temperatures in Burbank — regularly 155–160°F in July — degrade insulation on linesets and cause refrigerant to flash before reaching the indoor head, reducing cooling capacity. Santa Ana windblown debris also clogs outdoor coils, raising system pressure and triggering protective lockouts. We diagnose with digital pressure gauges and thermal imaging, then fix the root cause: relocating linesets, upgrading insulation, or deep-cleaning coils. Call (877) 454-5066 before the next heat wave hits.
Yes, all heat pump and mini split installations in Burbank require permits through Burbank Water and Power’s building and safety division, not through LADBS or SCE channels. BWP conducts its own inspections with its own checklist. We pull permits for every job and schedule inspections around your availability, because unpermitted work voids rebates and creates problems at resale. Call us and we’ll handle the BWP paperwork start to finish.
A multi-zone system lets you condition different areas independently, which matters in Burbank’s older homes where original layouts create uneven heating and cooling loads — west-facing bedrooms bake in afternoon sun while north-facing offices stay cold. One outdoor unit drives multiple indoor heads, each with its own thermostat, so you’re not wasting energy on empty rooms. For Burbank’s typical 1,200–1,800 square foot post-war home, a three-zone system usually covers living area, master bedroom, and back rooms efficiently. Call (877) 454-5066 for a load calculation and zone layout.
Written by Anthony Moreno, Owner at Meridian Heating & Air, serving Burbank and Los Angeles since 2005.