Heating & Furnace in Los Angeles — Same-Day Service, Done Right the First Time

Fast, Reliable Heating & Furnace Across Los Angeles

Furnace repair in Los Angeles typically costs $175–$825, with most calls completed same-day. Furnace replacement runs $4,130–$8,850, though SCAQMD Rule 1111 restrictions mean many Los Angeles homeowners end up with heat pump systems instead of traditional gas furnaces. Call (877) 454-5066 for a free estimate.

Call (877) 454-5066

We’ve been fixing and replacing heating systems across Los Angeles for nearly two decades. Anthony Moreno, our founder and lead installer, still shows up on the job — not just for estimates, but for the actual work. From pre-war bungalows in Silver Lake to mid-century tract homes in the Valley, we’ve seen what Los Angeles housing throws at furnaces, and we know the local codes that govern what you can actually install.

Why Meridian Heating & Air Los Angeles Is Los Angeles’s Preferred Heating & Furnace Company

Our reputation in Los Angeles is built on showing up and doing the work ourselves. Anthony has handled installations and emergency calls across the city since 2006 — 286 customers and counting have left reviews averaging 4.8 stars, and many mention specifically that the owner was the one on their roof or in their crawlspace.

That matters in Los Angeles, where heating problems aren’t always straightforward. A “simple” furnace replacement in a 1930s Craftsman can turn into a code-compliance puzzle when SCAQMD Rule 1111 rules out standard equipment. A no-heat call in Woodland Hills might trace back to attic ducts that collapsed in 150°F summer heat, not the furnace itself. When Anthony arrives, he’s already worked through these scenarios dozens of times in this exact market.

We serve residential and commercial clients from Koreatown to the Westside, with emergency HVAC service available for urgent situations. Our Heating & Furnace team carries experience across nine major brands, so we’re not pushing one product line because it’s all we know.

Our Heating & Furnace Services in Los Angeles

Furnace Repair

Most furnace repair calls in Los Angeles run $175–$825. We handle ignitor failures, gas valve problems, blower motor issues, and control board replacements across the city. In coastal neighborhoods like Santa Monica, we regularly find heat exchangers corroded by salt air — invisible cracks that standard carbon monoxide detectors might miss until they’re severe. We always inspect exchangers thoroughly on coastal jobs. In the Valley, we check duct integrity first; collapsed flex runs from past heat waves are common, and fixing the furnace won’t help if conditioned air never reaches the rooms.

Furnace Replacement

Here’s where Los Angeles gets complicated. SCAQMD Rule 1111 restricts residential furnaces to ultra-low NOx emissions (≤40 ng/J), which eliminates most standard-efficiency models sold freely in Orange County, San Diego, or anywhere else in the country. We visited a 1927 Spanish Colonial in Silver Lake where the original floor furnace finally died mid-January. The homeowner wanted a direct swap, but SCAQMD Rule 1111 meant that standard furnace was off-limits. Instead, we retrofitted a ductless mini-split heat pump system — preserving the original tile floors and avoiding the need for ductwork the house never had.

Replacement costs $4,130–$8,850 depending on system type, electrical upgrades needed, and whether we’re adapting a home with no existing ductwork. For homes that can accommodate compliant gas equipment, we work with your brand — Trane, Lennox, Goodman, Rheem, and others.

Furnace Tune-Up

A furnace tune-up in Los Angeles costs $95–$235. We recommend annual service before the heating season, especially for older systems in pre-1950 homes where original gas lines and venting may not meet current standards. Our tune-ups include combustion analysis, heat exchanger inspection, gas pressure verification, and duct leakage check. In Valley homes with attic ductwork, we specifically inspect for heat-damaged flex runs that could fail under next summer’s load.

Heat Exchanger Inspection & Replacement

Heat exchanger failure is the repair that keeps us up at night — cracked exchangers can leak carbon monoxide into living spaces. In Los Angeles, coastal salt-air corrosion accelerates exterior damage that inland contractors rarely see. We inspect with visual, camera, and combustion analysis methods. Replacement ranges from $1,200–$2,800 for the exchanger alone, though we always discuss full system replacement when the furnace is past 15 years. Many Los Angeles homes with failed exchangers are also facing SCAQMD compliance issues, so we evaluate the full picture.

Trusted Brands We Service in Los Angeles

We work on your brand — not just the ones we prefer to sell. Our field experience covers Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We stock common parts for Los Angeles customers to minimize wait times, and our relationships with local distributors mean we can source less common components for older systems still running in pre-war homes. Whether it’s a 1990s Rheem in a Valley tract house or a newer Lennox in a Westside remodel, we’ve worked on it.

Common Heating & Furnace Problems We See in Los Angeles Homes

• Salt-air heat exchanger corrosion in coastal neighborhoods. Santa Monica, Pacific Palisades, and Venice see exterior corrosion on furnace heat exchangers that inland contractors rarely encounter. The damage starts from the outside in, creating cracks that standard CO detectors may not catch until they’re severe. We inspect with combustion analyzers on every coastal service call.
• Attic flex-duct collapse mimicking furnace failure in Valley homes. Woodland Hills, Canoga Park, and other Valley neighborhoods hit 110°F+ regularly. Original 1960s–1970s flex duct in attics reaching 150–160°F softens, sags, and partially collapses. Homeowners call with “no heat” or “weak airflow” that traces back to duct failure, not the furnace itself.
• Undersized gas lines in pre-1950 homes. Los Feliz, Silver Lake, and Mid-City Craftsman bungalows often have original gas lines sized for floor furnaces or wall heaters. Modern high-efficiency furnaces require more gas volume. We find gas line upsizing is needed — or we recommend switching to electric heat pumps that avoid the gas infrastructure entirely.
• SCAQMD Rule 1111 compliance blocking straightforward replacements. Los Angeles is the only major metro where this rule bans standard-efficiency furnaces. Homeowners expecting a simple swap often need to consider heat pumps or ultra-low NOx units with limited model availability. We navigate this on every replacement call.

Pricing for Heating & Furnace in Los Angeles, CA

We Also Serve Cities Near Los Angeles

Our service area extends to Koreatown, Echo Park, Silver Lake, and View Park-Windsor Hills. Whether you’re in a 1920s duplex off Sunset Boulevard or a mid-century home in the hills, we bring the same owner-led approach. Anthony handles installations and service calls across these neighborhoods personally.

FAQs — Heating & Furnace in Los Angeles